Wireless Security Setup

How to configure wireless security
Don't like reading? Want to see pictures? Try these links.
Enable Wireless. Configure Security.

Click on Wireless link, and then select Basic Wireless Settings.
In this window, change the following options:
* Wireless Network mode: Mixed.
* Wireless Network Name (SSID): This is the name you see when searching for Wireless networks. You can make it anything you want.
* Wireless Channel: Default is 6, I like to go higher to 11. Try different options to see which one gives your PC the strongest signal strength.
* Wireless SSID Broadcast: Enabled.
Save Settings
After you save those settings click on the Wireless Security link. Change the following options:
* Security mode: WPA Personal.
* WPA Algorithms: TKIP
* WPA Shared Key: This is your network password, knock yourself out. Just do not for get it!
Save Settings

Default Gateways

Router	Gateway	User	Password
Belkin	192.168.2.1	admin	n/a
D-Link	192.168.0.1 192.168.1.1	Admin n/a admin user n/a	Admin admin n/a n/a 1234
Linksys	192.168.0.1 192.168.1.1	n/a admin	admin admin
Netgear	192.168.0.1	admin n/a Admin	password 1234 1234